| EASy-Bottle is an
easy -to use security product that allows a
merchant to openly display their spirits,
wines and champagnes securely on the store
floor. EASy-Bottle accommodates a wide
variety of bottles sealing them so they cannot
be opened by unauthorized personnel.
Applying the EASy-Bottle:
1. Select the appropriate size
EASy- Bottle
to fit the designated bottle. The size
is indicated on the inside of the EASy-Bottle
insert. (fig. 1)
EXTRA LARGE: EXL/G - wide mouth 1.75 lt. bottles LARGE: L/G - champagne, 1.75 lt .
bottles, drip proof
SMALL: S/P - smaller champagne, wine and
spirits |
2. Place EASy-Bottle over the top of the
bottle and press down. (fig. 2)
3. The bottle is now ready
for open display.
NOTE: To adjust EASy-Bottle
for various sized bottle necks, simply lift up
and squeeze the finger tension ring against
the lip of the bottle to tighten . Press
down on the top of the top of the EASy-Bottle
to minimize the height. (fig. 3)
Removing the EASy-Bottle:
1. Align the tabs on the key
with the slots on the top of the EASy-Bottle.
(fig. 4)
2. Press down allowing the
EASy-Bottle to release. Lift off both the key
and the EASy-Bottle.
3. Remove from bottle and
set aside for product reuse.
EASy-Bottle Cap
Sizes:
Small:
Internal dimensions: .95” to 1.27”
Commonly fits: pint, liter, 375 and 750 ml.
bottles
Large:
Internal dimensions: 1.15” to 1.47”
Commonly fits: 1.75 liter, large wine, standard
champagne, non-drip-spout wine bottles.
Extra Large:
Internal dimensions: 1.41” to 1.75”
Commonly fits: all wide-mouth 1.75 ltr.
bottles, i.e., Jack Daniels, Jim Beam,
Johnny Walker Red |
buttons
at the bottom of this page.
